MER-MADE reducers are made to two different overall lengths, depending on the reducer size to allow for standardization. Shorter or longer lengths can be made special order to fit a specific situation.
The reducers are rated to 50 psi pressure rating and the flanges are flat face with 150 lb ANSI drilling patterns.
Concentric or eccentric reducers are used to properly reduce into and out of circulating pumps. Pump connections are usually smaller than the lines coming to and from the pump. Bushings should not be used to accomplish this reduction as they cause excessive pressure loss and water turbulence.
| Main | Sand Filters | Assemblies | Basket Strainers | Control Valves | Float Valves |
| Reducers | Surge Tanks |